Electronics Overview
These documentation pages are based on the GitHub project TennesseeLunabotics/lunaframe
Last updated
These documentation pages are based on the GitHub project TennesseeLunabotics/lunaframe
Last updated
The University of Tennessee
UTK.eduTickle College of EngineeringKao Innovation & Collaboration StudioThis work is under a Creative Commons Attribution-ShareAlike 4.0 International License
The control systems on our robot make use of three primary compute devices. These are:
Client Laptop
NVIDIA Jetson Nano
ESP32 Microcontroller
Refer to the linked page for more information on these devices specifically.
The following devices are used as a part of our electrical box. All can be found on the wiring diagram except for the Linear Actuators and Cytron Controllers. We've included those in this list since they worked well for our specific use case, but this wiki and framework does not implement anything beyond a basic drivetrain.
REV NEO Brushless Motors
REV Spark Max Motor Controllers
Progressive Automations Linear Actuators
Cytron MD20A Motor Controllers
AndyMark PDB
AndyMark 120A Breaker
Off-The-Shelf (OTS) variable buck converter
OTS LIPO 14.7v Battery
OTS LIPO 7.4v Battery
OTS E-STOP
OTS low-voltage relay
OTS On-Off button
OTS high-voltage relay
OTS data logger
Blue, Green, and Yellow lines are data.
Red and Black lines are positive/ground power connections respectively.
